See Real Estimates Before You Commit

Excavation, grading, soil disposal, and site prep for a mid-size commercial project. Cut-and-fill calculations and unit pricing per cubic metre, with quantities traceable to the plans.

Footings, slabs, columns, and walls with formwork quantities. Material volumes in cubic metres, rebar schedules, and pour-sequencing notes so your super knows what's coming.

Block count, brick quantities, mortar volumes, and lintel schedules for a commercial masonry scope. Unit pricing referenced to current Canadian market rates, broken out by wall type.

Wide-flange beams, columns, connection plates, and miscellaneous metals for an industrial structure. Weight-based takeoff with current steel pricing per tonne, no guessing involved.

Rebar schedule by bar size and length, lap splice calculations, and total weight by zone for a concrete foundation package. Priced per kilogram with placement labour split out.

Stud count, header schedules, sheathing quantities, and engineered lumber for a wood-frame residential build. Board footage and linear metre counts with current lumber pricing from Canadian suppliers.

Flat and sloped roof areas, membrane quantities, insulation board, flashing, and fastener counts. Priced per square metre with material and labour split by zone, not lumped together.

Batt, blown, and rigid board insulation for wall, ceiling, and below-grade applications. RSI values noted per zone, quantities calculated separately so you can price material and labour on their own.

Board counts, joint compound, tape, and fasteners for a multi-room commercial fit-out. Ceiling and wall areas broken out by board type, with metal stud framing quantities on the same sheet.

LVT, carpet tile, polished concrete, and ceramic tile areas by room. Substrate prep, adhesive, transition strips, and waste allowances per finish type, all priced separately.

Interior and exterior paint quantities by surface type, primer coats, and finish coats. Coverage rates calculated per coat, material and labour shown on separate lines so you can adjust either independently.

Fixture counts, pipe linear metres by diameter and material, fittings, valves, and rough-in labour for a multi-storey residential building. Takeoff done in FastPIPE so every spool is accounted for.

Ductwork quantities, equipment schedules, diffuser counts, and insulation for a commercial HVAC scope. Done in FastDUCT with material and labour split by system zone so each floor stands on its own.

Mechanical, electrical, and plumbing combined for a mid-size commercial project. Trade-by-trade summaries plus a single rolled-up total, so your GC and subs can each read their own section without digging through the whole document.